Microlon vs. Oil Additives

The Many Uses of Microlon Worldwide

A Product Report

Benefits of Microlon

Microlon Gun Juice

Prices and Ordering

Treatment of Parts



What is Microlon?

Microlon is a metal treatment, not an additive. It is not designed to replace or improve oil. Microlon's proprietary formulation is compatible with most fluids.

This enables the product to use engine fluids as a carrier to get to the boundary layer. Microlon's core chemistry is coupled with highest quality base materials to provide a wide range of uses.

Uses for Microlon

1. Refrigerant oil to treat air conditioning units
2. Gear oil: treats manual transmissions, differentials, transfer cases
3. Hydraulic oil to treat hydraulic systems
4. Greases to treat chassis and wheel bearings

A Microlon treatment, properly applied, will provide any engine with a dry-film lubrication that will not only protect the engine but will dramatically reduce friction and wear. Reduction in wear will result in longer lasting and more efficient operation of equipment.

Under high magnification, all metals are very much like a sponge. The peaks and valleys fill with carbon, varnish and dirt as a result of imperfect combustion. Microlon is a thin liquid, It contains no oil. When Microlon is introduced into the crankcase and fuel it travels through these systems and clinically cleans the matrix of the metal. Once the metal is clean it is ready to receive the resin, along with corrosion inhibitors and antioxidants contained in the product.

The resin has no affinity for metal, but it does have an affinity for itself and will self-weld one to another. With the particles of resin in suspension in Microlon, two bearing surfaces rubbing against each other trap those particles and rub them down into the surface of each other, forming a mechanical lock. This process continues until the metal is completely filled and its internal friction will not permit another particle to be pushed into it or until there is no more particulate to be pushed into the metal. During this process of formation of the Microlon film, the resin particles weld together to form a continuous film.

When the two metal surfaces are impregnated to the point where they simply will not take any more resin, and when the film is formed in those surfaces, then friction is considerably reduced, thereby increasing the efficiency of the mechanical device. As it works in automobile and aircraft engines it will work in any mechanical device where there is relative motion between components.

The benefits of a ONE-TIME Microlon treatment are:

1. Reduced wear
2. Reduced fuel consumption
3. More useable horsepower
4. Quieter operation
5. Lower operating temperatures
6. Quicker and easier starts
7. Lower hydrocarbon emissions
8. Smoother engine operation
9. Normalized compression
10. Protection against corrosion
11. Reduced oil consumption
12. Dry start protection

Prices and Ordering
Microlon was awarded the "Medaille De Vermeil" at the "Salon Internationale des Techniques et des Idees Nouvelles" in Geneva, Switzerland, This prestigious award representing a first in its class for new product innovation, was presented to Microlon in Geneva in 1978. This is only the 7th time in 100 years the award was made.

This site is designed and maintained by "WebMaster" - DPR Racing, Inc. All contents and images on this site constitutes the property of DPR Racing, Inc. and may not be copied, reproduced or distributed without prior written permission. © 2012 DPR Racing. Click here to CONTACT us via mail, phone or E-Mail.